If you are configuring a network with Dlink router, you can easily enable important functions such as firewall for blocking unauthorized services, dynamic host configuration protocol for assigning Internet protocol address to devices that connect to the network.
Lets’ see how to start the Dlink router configuration process -
1. Take a telephone cable and connect one of its end to the phone jack on the wall. After this, connect another end of telephone cable into the “Line” port on the DSL filter.
2. Next, take another telephone cable and connect one of its ends into the ADSL port on the DSL filter. Then plug another end of telephone cable into the “DSL” jack that is located on the rear of Dlink router.
3. Now take a Cat-5 ethernet cable and plug into one of the numbered local area network ports on the Dlink router. Afterward, you have to insert another end of the ethernet cable into the Ethernet jack on the available workstation.
4. Once you finish above steps, its time to connect your device to the power outlet. Just press the “On/Off” button Dlink router and turn it on.
5. Launch your favorite web browser and navigate to the web address “http://192.168.1.1”. You are now redirected to a login screen where you have to fill login credentials in the username and password fields. After entering login credentials, press Enter and log into Dlink router as an administrator.
6. In Dlink router set-up wizard, move towards Home tab and choose “DSL Auto-Connect”. After this select the “Connection Type” and encapsulation mode from the displaying options. If you are not aware which network protocols your ADSL connection uses then contact your Internet Service Provider (ISP).
7. Afterward, you have to enter DSL account details in the username and password field boxes. If there is no activity on the gateway in this time period then choose “Dial on Demand” option to disconnect. Hit Next key.
8. You can choose “Dial on Demand” to connect and disconnect from the data sessions. You can also disconnect data sessions while sending or receiving emails.
9. Then, choose “PPP IP Extension”, “Use Static IP address”, or “Use the following default gateway” and then fill exact info if your ISP requires one or all preceding configurations.
10. To keep your connection active, choose the option “Keep alive” and then hit Next key.
11. In next step, choose “Enable NAT” and “Enable Firewall”. Leave other settings with the default values and then click on Next button.
12. Now, you can use “192.168.1.1” as your router’s IP address and “255.255.255.0” as the subnet mask. Tap on “Enable DHCP Server”.
13. Also, you have to set Start IP address as “192.168.1.2” and End IP address as “192.168.1.254”. Then hit Next key.
14. Lastly, enter a name for the network in SSID field and then hit Next. Head towards Summary screen and review your selections. Press a click on Reboot option and finish configuring Dlink router.
Note – These steps may vary according to the model of your device.
Rectify all Dlink Router Conflicting Issues with Dlink Router Technical Support
User having any kind of technical issues with Dlink Router can reach to the specialists at the Dlink Technical Support Number. One of the best thing ofcontacting experts is that they provide permanent solutions to all kinds of hurdles that are associated with Dlink router. To get the assistance for any issue related to Dlink, you need not to step out of your home, just call right away at Dlink Router Technical Support Number and get instant help for all technical concerns.
Lets’ see how to start the Dlink router configuration process -
1. Take a telephone cable and connect one of its end to the phone jack on the wall. After this, connect another end of telephone cable into the “Line” port on the DSL filter.
2. Next, take another telephone cable and connect one of its ends into the ADSL port on the DSL filter. Then plug another end of telephone cable into the “DSL” jack that is located on the rear of Dlink router.
3. Now take a Cat-5 ethernet cable and plug into one of the numbered local area network ports on the Dlink router. Afterward, you have to insert another end of the ethernet cable into the Ethernet jack on the available workstation.
4. Once you finish above steps, its time to connect your device to the power outlet. Just press the “On/Off” button Dlink router and turn it on.
5. Launch your favorite web browser and navigate to the web address “http://192.168.1.1”. You are now redirected to a login screen where you have to fill login credentials in the username and password fields. After entering login credentials, press Enter and log into Dlink router as an administrator.
6. In Dlink router set-up wizard, move towards Home tab and choose “DSL Auto-Connect”. After this select the “Connection Type” and encapsulation mode from the displaying options. If you are not aware which network protocols your ADSL connection uses then contact your Internet Service Provider (ISP).
7. Afterward, you have to enter DSL account details in the username and password field boxes. If there is no activity on the gateway in this time period then choose “Dial on Demand” option to disconnect. Hit Next key.
8. You can choose “Dial on Demand” to connect and disconnect from the data sessions. You can also disconnect data sessions while sending or receiving emails.
9. Then, choose “PPP IP Extension”, “Use Static IP address”, or “Use the following default gateway” and then fill exact info if your ISP requires one or all preceding configurations.
10. To keep your connection active, choose the option “Keep alive” and then hit Next key.
11. In next step, choose “Enable NAT” and “Enable Firewall”. Leave other settings with the default values and then click on Next button.
12. Now, you can use “192.168.1.1” as your router’s IP address and “255.255.255.0” as the subnet mask. Tap on “Enable DHCP Server”.
13. Also, you have to set Start IP address as “192.168.1.2” and End IP address as “192.168.1.254”. Then hit Next key.
14. Lastly, enter a name for the network in SSID field and then hit Next. Head towards Summary screen and review your selections. Press a click on Reboot option and finish configuring Dlink router.
Note – These steps may vary according to the model of your device.
Rectify all Dlink Router Conflicting Issues with Dlink Router Technical Support
User having any kind of technical issues with Dlink Router can reach to the specialists at the Dlink Technical Support Number. One of the best thing ofcontacting experts is that they provide permanent solutions to all kinds of hurdles that are associated with Dlink router. To get the assistance for any issue related to Dlink, you need not to step out of your home, just call right away at Dlink Router Technical Support Number and get instant help for all technical concerns.
No comments:
Post a Comment